Siemens 600 HP Perfect Harmony Drives

1. System part number is A5E03491636, A5E03491637, A5E03791638, A5E03491639.

2. Ratings: 3300' ASl, 40 degrees Celsius Max ambient

    Input: 416vac, +10%, -5%, 90Hz, 75.10A RMS

   Output: 0-4160V, 0-60Hz, 100A RMS

   Control: 450/480V-120V, 60Hz 5A

 

   Estimated Losses: 18KW

   Enclosure type: Nema 1 ventilated

   Enclosure color: ANSI No. 61 gray textured

   Weight: Estimated at 6694.0 lbs [3039 kgs]

3. Connections:

   Input Power: Input bus (L1,L2,L3) .41 Dia. holes on copper bus pads. see sheet 2 for details

   Output Power: Output bus (T1,T2,T3) .41 Dia. holes on copper bus pads, see sheet 2 for details

   Control Power: pressure screw terminals for #22 - #BAWG wire

 

Construction:

1) Nema Type 1, 11 gauge, solid weld construction, welds and seams ground smooth, on a 4" channel base.

2) Finish coat is A.N.S.I. 61, light gray, paint.

3) Removable bottom lifting plates.

4) Concealed hinge, loose joint pin.

5) Manufacturer's data plate (contains information listed under system rating), non-corrosive, permantnly stamped and aattached to enclosure.

6) Door stops hold doors in 110angle, open position.

7) Ground bus, full length, continuous, 1/4" x 2" silver plated copper.

8)Bus bar, silver plated copper, free of sharp edges or burrs

9) Signs and/or labels: "Danger, keep out, high voltage" label located on exterior doors

 

System Ratings:

 

Nominal system voltage: 4.16 kV

Maximum design voltage: 4.76 kV

Basic Insulation level: 60 kV BIL

Continuous current: 600 amp

Short circuit breaking current (breaker): 40KA RMS

Short circuit making current (breaker):104KA PEAK

Approximate weight:1600 lbs.

Quantity: 2

Manufacturer: Siemens

HP: 600

Lot Number: Perfect Harmony

Price: Request Price

Contact Sales >
LEL International

BUY OR SELL WITH LEL

Error Message

×